At least 200,000 m3 of timber are harvested annually using semi-mechanised harvesting
systems (SMS) on the Viphya forest plantations in Malawi. Although these systems have
long been used on the Viphya, no investigation on their productivity has so far been reported.
The absence of local productivity models created uncertainty about the importance of sitebased
factors that influence timber harvesting productivity of these systems on the Viphya.
Secondly, there is paucity of information regarding the appropriate timber harvesting systems
for production maximisation and cost minimisation. This study aimed to develop prediction
models for estimating the productivity and costs of semi-mechanised and simulated
mechanised timber harvesting systems on the Viphya forest plantations.
The study was conducted in Pinus kesiya stands at Kalungulu and Champhoyo forest stations
of the Viphya forest plantations. A work study approach was followed to capture harvesting
time and volume data. Stepwise multiple regressions were used to develop felling time
models for a chainsaw over tree size, inter-tree distance, slope, ground condition, brush
density, and ground roughness; and skidding time models over distance, slope, ground
condition, ground roughness and volume skidded per cycle for a grapple skidder. Models
were statistically validated. Secondary work study data for semi-mechanised systems were
simulated for mechanised productivity based on local site factors.
The study had shown that diameter at breast height and inter-tree distance were important
factors that best explained felling time prediction models in Pinus kesiya stands on the
Viphya forest plantations. Similarly, distance from stump to the roadside landing was the
most important factor in addition to volume load, slope and ground conditions that
determined grapple skidding time.
Mechanised systems appear to be more advantageous than semi-mechanised systems. The
former are associated with lower operating costs and inventories with relatively high
production rates. Therefore, mechanised systems could help to optimise timber harvesting
productivity on the Viphya. Further studies should be conducted to determine the effect of
different ground conditions and roughness on skidding productivity. / Dissertation (MSc)--University of Pretoria, 2012. / Plant Production and Soil Science / MSc / Unrestricted
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:up/oai:repository.up.ac.za:2263/30939 |
| Date | 21 June 2013 |
| Creators | Ngulube, Elisha Stephen |
| Contributors | Brink, Michal, Chirwa, Paxie W. |
| Publisher | University of Pretoria |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Dissertation |
| Rights | © 2012 University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria E13/4/465/ |
Page generated in 0.0028 seconds