Water in porous rocks (e.g. sandstone) plays a fundamental role in their disintegration. However, the places where water enters the sandstone rocks are somewhat overlooked. At two sites in the Český ráj region, I use Karsten tube to measure capillary water absorption (CWA) of natural sandstone exposures and, using TDR (Time Domain Reflectometry) method, I study movement of water in a shallow zone of ruiniform sandstone landscape. The CWA differed up to four orders of magnitude at a distance of tens of meters, mostly depending on the type of the surface. The highest CWA was measured at highly weathered surfaces, the second most absorbent were less weathered surfaces covered with a biologically-initiated rock crust. The horizontal surfaces on the tops of the rock formations were even less absorbent, probably due to clogging by fine particles from soil. Surfaces covered with iron crust were the least absorbent. The differences between those surfaces are significant. After simulated infiltration, the maximum rate of the propagation of the wet front in the sandstone was from 5,5.10-6 do 1,9.10-4 m.s-1 measured by TDR. The water propagated at this rate only to a certain depth (the first tens of cm), but then the propagation stopped or slowed down rapidly. From a long-term measurement of volumetric...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:435014 |
| Date | January 2020 |
| Creators | Sysel, Ondřej |
| Contributors | Slavík, Martin, Tesař, Miroslav |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds