Piston rings are installed in the piston and cylinder wall, which does not have a perfect round shape due to machining tolerances or external loads e.g. head bolts tightening. If the ring cannot follow these deformations, a localized lack of contact will occur and consequently an increase in the engine blow-by and lubricant oil consumption. Current 2D computational methods can not implement such effects – more complex model is necessary. The presented master’s thesis is focused on the developement of a flexible 3D piston ring model able to capture local deformations. It is based on the Timoshenko beam theory in cooperation with MBS software Adams. Model is then compared with FEM using software ANSYS. The validated piston ring model is assembled into the piston/cylinder liner and very basic simulations are run. Finally, future improvements are suggested.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231299 |
| Date | January 2014 |
| Creators | Dlugoš, Jozef |
| Contributors | Raffai, Peter, Novotný, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds