This thesis reports a novel flexible wire bond structured capacitive sensor design that can measure the strain in the tyres stably and reliably without any influence or disturbance to the tyre material during the measurement. An industry achievable fabrication method based on the design has been also investigated and it is also believed that there is a possibility of introducing the sensor into mass production. Bond wire technology, laser machining technology and photolithography technology are adopted to fabricate the strain sensor, in which the wire bonding technology is the most significant process for this design. An array of 25 micrometer bond wires that are normally employed for electrical connections in integrated circuits is built to create an interdigitated structure and generating approximately 10pF capacitance. The array that in an approximately 8*8 mm area consists of 50 wire loops and creates 49 capacitor pairs. The aluminium wires are bonded to a flexible PCB which is specially finished to allow direct bonding to copper surface. The wire array is finally packaged and embedded in a flexible and compliant material, polydimethylsiloxane (PDMS), which acts as the structural material that is strained. The implementations of the bond wire, the flexible PCB and PDMS embedding minimize the stiffness of the strain sensor while the PDMS can also prevent the sensor from any potential damage. When a tensile strain occurs, the wires are stretched further apart reducing the capacitance. On the contrary, the wires move closer and increase the capacitance if the strain sensor is compressed. Different from the traditional interdigital capacitor, the capacitance of the device is almost in a linear relationship with respect to the strain, which can measure the strain up to at least ±60000 micro-strain (±6%) with the resolution of 111 micro-strain (0.01%).
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:683612 |
| Date | January 2016 |
| Creators | Cao, Siyang |
| Publisher | University of Birmingham |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://etheses.bham.ac.uk//id/eprint/6619/ |
Page generated in 0.0129 seconds