The main purpose of this study was to examine the difference in intrapulpal temperature (IPT) comparing a “grinding” and a “cutting” technique during single crown preparation. The difference in preparation time between the two techniques was also examined. A thermocouple was placed in the pulp chamber of 20 extracted human permanent molar teeth. The teeth were placed in a silicone model. The model was immersed in a thermostatically controlled water bath with a temperature of 37 degrees centigrade (°C), and with a water level reaching the cementoenamel junction at the teeth. For both preparation techniques an electric handpiece (NSK Ti-Max Ti85L 1:5) was used. A diamond bur was used for the “grinding” and a carbide bur for the “cutting” technique. The IPT during preparation was measured with a K-thermocouple connected to Testo 176 T4 temperature data logger. There was a significant difference in IPT rise between the two techniques for preparing the teeth. The “cutting” technique showed a higher mean temperature, 31.9 °C, compared to the “grinding”, 29.5 °C (p<0.05). Neither reached the critical value of 5.5 °C IPT increase. The “grinding” technique averaged a longer preparation time of 106 seconds per tooth than the “cutting” technique (p<0.05). Our study shows that the “cutting” technique results in a higher mean temperature but that both preparation techniques can be considered as safe in regard to IPT during single crown preparation as long as sufficient water cooling is applied.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-154236 |
Date | January 2018 |
Creators | Garis, David, Johansson, Christoffer |
Publisher | Umeå universitet, Institutionen för odontologi, Umeå universitet, Institutionen för odontologi |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0018 seconds