This dissertation is focused on the effects of both artificially produced and real roughness features on mixed lubrication film formation during start-up and reversal of non-conformal contacts operated under rolling/sliding conditions. The start-up operation of mixed lubricated contacts represents one of the transient conditions that bring the risk of the surface damage because of asperities interactions. Chromatic interferograms captured by CMOS high-speed camera during start up of the motion enabled to observe the detailed changes in lubrication film caused by surface features. The observation of the effects of surface dents artificially produced on the ball surface helped to understand better the behaviour of real surface topography. It was found that the presence of shallow surface features can help to separate mixed lubricated rubbing surfaces more efficiently than it could be suggested from the results obtained with smooth surfaces. It can be suggested from the obtain results that properly designed topography of the rubbing surfaces can help to reduce the asperities interactions under transient operational conditions.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233855 |
Date | January 2009 |
Creators | Svoboda, Petr |
Contributors | Dzimko, Marián, Čermák, Jan, Dobeš, Petr, Křupka, Ivan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds