The effect of configuration changes and add-on devices on the drag reduction of a tractor-trailer is studied through wind tunnel tests using two 1/12-scale models. The configuration changes involve ground clearance, tractor-trailer gap, roof angle and back inclination while add-on devices include flow deflectors, skirts and gap seals. Moving surface boundary layer control as a means of drag reduction is also attempted. Both drag and pressure data are obtained to help identify local contributions. Results suggest that an optimum combination of configuration parameters can reduce drag up to 17% while the add-on devices resulted in a further decrease by a modest amount. The results with moving surface boundary layer control proved to be inconclusive. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/25143 |
| Date | January 1985 |
| Creators | Wacker, Thomas |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0118 seconds