Return to search

Nízkošumový zesilovač pro pásmo S / Low-noise S-band amplifier

This work deals with design, simulation and realisation of a receiving systém of an S-band front end for satellite communication. The first part of the project is designed the low noise amplifier (LNA) with high associated gain. The basic point of the design is choice of the active device. In the present time are available the ultra low noise transistors based on the GaAs with high mobility electron. The two-stage LNA has been designed with Agilent ATF-55143. It is pseudomorphic HEMTs ,which work in an enhancement mode.These transistor do not require a negative bias voltage and have extremely good typical noise figure. The design includes an interdigital tuned band pass filter between stages. The second part of the project is search another way design circuit. There are designed two LNA with paralel coupled line filter. The first has been applied on a PTFE substrate Duroid 5880 with relative permitivity 2,2 and tg d = 0,009. The substrate FR-4 (r = 4.34) with the thickness 0.06” was used for the realization.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217670
Date January 2008
CreatorsPotěšil, Dušan
ContributorsVágner, Petr, Kasal, Miroslav
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0019 seconds