Master of Engineering (Research) / Multiple antenna systems are an appealing candidate for emerging fourth-generation wireless networks due to its potential to exploit space diversity for increasing conveyed throughput without wasting bandwidth and power resources. Particularly, layered space-time architecture (LST) proposed by Foschini, is a technique to achieve a significant fraction of the theoretical capacity with a reasonable implementation complexity. There has been a great deal of challenges in the detection of space-time signal; especially to design a low-complexity detector, which can efficiently remove multi-layer interference and approach the interference free bound. The application of iterative principle to joint detection and decoding has been a promising approach. It has been shown that, the iterative receiver with parallel interference canceller (PIC) has a low linear complexity and near interference free performance. Furthermore, it is widely accepted that the performance of digital communication systems can be considerably improved once the channel state information (CSI) is used to optimize the transmit signal. In this thesis, the problem of the design of a power allocation strategy in LST architecture to simultaneously optimize coding, diversity and weighting gains is addressed. A more practical scenario is also considered by assuming imperfect CSI at the receiver. The effect of channel estimation errors in LST architecture with an iterative PIC receiver is investigated. It is shown that imperfect channel estimation at an LST receiver results in erroneous decision statistics at the very first iteration and this error propagates to the subsequent iterations, which ultimately leads to severe degradation of the overall performance. We design a transmit power allocation policy to take into account the imperfection in the channel estimation process. The transmit power of various layers is optimized through minimization of the average bit error rate (BER) of the LST architecture with a low complexity iterative PIC detector. At the receiver, the PIC detector performs both interference regeneration and cancellation simultaneously for all layers. A convolutional code is used as the constituent code. The iterative decoding principle is applied to pass the a posteriori probability estimates between the detector and decoders. The decoder is based on the maximum a posteriori (MAP) algorithms. A closed-form optimal solution for power allocation in terms of the minimum BER is obtained. In order to validate the effectiveness of the proposed schemes, substantial simulation results are provided.
| Identifer | oai:union.ndltd.org:ADTP/216039 |
| Date | January 2006 |
| Creators | Karim, Md Anisul |
| Publisher | School of Electrical & Information Engineering,, Faculty of Engineering, The University of Sydney. |
| Source Sets | Australiasian Digital Theses Program |
| Language | en_AU |
| Detected Language | English |
| Rights | The author retains copyright of this thesis., http://www.library.usyd.edu.au/copyright.html |
Page generated in 0.0012 seconds