Statistics indicate that defects in brake system contribute significantly to fatal crashes
involving commercial vehicles. Hence there is a need for developing preventive and
active safety measures for assessing the performance of an air brake system in trucks.
Existing techniques for assessing the performance of brakes are infrastructure
intensive, time and labor intensive. The premise of this thesis is that model-based
diagnostic techniques can be employed to overcome these limitations of existing tech-
niques. The design of a model-based diagnostic system requires the development and
experimental corroboration of a mathematical model of the evolution of pressure in
each brake chamber of a truck in response to the application of brake pedal input by
the driver, when there are no faults or defects in the brake system.
This thesis is aimed at modeling and experimentally corroborating a subsystem
of an air brake system, namely the pneumatic relay valve. The pneumatic relay
valve takes a input signal from the primary delivery of a treadle valve and meters
air from a storage reservoir to Type 30 rear brake chambers. A description of the
development of the model, the experimental setup and corroborating experimental
results are provided.
| Identifer | oai:union.ndltd.org:tamu.edu/oai:repository.tamu.edu:1969.1/2363 |
| Date | 29 August 2005 |
| Creators | Vilayannur Natarajan, Shankar |
| Contributors | Darbha, Swaroop, Rajagopal, Kumbakonam R. |
| Publisher | Texas A&M University |
| Source Sets | Texas A and M University |
| Language | en_US |
| Detected Language | English |
| Type | Electronic Thesis, text |
| Format | 1207436 bytes, electronic, application/pdf, born digital |
Page generated in 0.0018 seconds