This thesis deals with the behaviour and design of triangular trusses fabricated from Hollow Structural Sections (HSS), with two Warren-type web planes and a single tension chord. Experimental programs are described in which triangular truss segments and simplified joints were tested in order to investigate the behaviour of compression web members and tension-chord welded joints. The mechanics of joint deformations are analysed in relation to the yield line theory, and simple models are shown to give a good prediction of the joint stiffnesses and strengths. Complex yield line models are investigated, but are slightly or not superior to the simple models. Recommendations are established covering the design of tension and compression chord joints, as well as chord and web members. The design of a 22 m span triangular truss is outlined.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.75364 |
Date | January 1987 |
Creators | Bauer, Dominique. |
Publisher | McGill University |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Format | application/pdf |
Coverage | Doctor of Philosophy (Department of Civil Engineering and Applied Mechanics.) |
Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
Relation | alephsysno: 000417498, proquestno: AAINL38336, Theses scanned by UMI/ProQuest. |
Page generated in 0.0343 seconds