The aim of this work is to create a computational model of radial industrial tumble dryers, to calculate and identify the amount of air that flows through the inside of the drum itself. The calculation will be performed via computational fluid dynamics (CFD). Furthermore, compile transient balance model of mentioned dryers. Perform simulation balance model and compare the results of simulations with experimental measurements. By comparing the experimental data and simulation to determine the degrees of freedom of balance model and evaluate their impact on the assembled transient model. For a better understanding of the drying process, there is constructed a system of differential equations describing heat and moisture within the material being dried on a simple model. In the section devoted to the computational analysis of fluid flow is analyzed existing geometry of the drum, which has a major impact on the flow of air inside the drum itself. Following describes how to simplify its complex geometry entering the computational fluid dynamics. Then, there is carried out a simulation of fluid flow inside the tumble dryers using MRF and Sliding Mesh models. Finally, there is an analysis of the data obtained and determined the average amount of air flowing through the drum itself. On the contrary, the aim of the work is not to create another text tool for students engaged in CFD theme.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231275 |
| Date | January 2014 |
| Creators | Dohnal, Miloslav |
| Contributors | Juřena, Tomáš, Hájek, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds