Return to search

Experimental Investigation of Shock-Shock Interactions over a 2-D Wedge at M = 6

The effects of fin-leading-edge radius and sweep angle on peak heating rates due to shock-shock interactions were investigated in the NASA Langley Research Center 20-inch Mach 6 Air Tunnel.  The fin model leading edges, which represent cylindrical leading edges or struts on hypersonic vehicles, were varied from 0.25 inches to 0.75 inches in radius.  A 9° wedge generated a planar oblique shock at 16.7° to the flow that intersected the fin bow shock, producing a shock-shock interaction that impinged on the fin leading edge.  The fin angle of attack was varied from 0° (normal to the free-stream) to 15° and 25° swept forward.  Global temperature data was obtained from the surface of the fused silica fins through phosphor thermography.  Metal oil flow models with the same geometries as the fused silica models were used to visualize the streamline patterns for each angle of attack.  High-speed zoom-schlieren videos were recorded to show the features and temporal unsteadiness of the shock-shock interactions.  The temperature data were analyzed using one-dimensional semi-infinite as well as one- and two-dimensional finite-volume methods to determine the proper heat transfer analysis approach to minimize errors from lateral heat conduction due to the presence of strong surface temperature gradients induced by the shock interactions.  The general trends in the leading-edge heat transfer behavior were similar for the three shock-shock interactions, respectively, between the test articles with varying leading-edge radius.  The dimensional peak heat transfer coefficient augmentation increased with decreasing leading-edge radius.  The dimensional peak heat transfer output from the two-dimensional code was about 20% higher than the value from a standard, semi-infinite one-dimensional method. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/23202
Date05 June 2013
CreatorsJones, Michelle Lynne
ContributorsMechanical Engineering, von Spakovsky, Michael R., O'Brien, Walter F. Jr., Berry, Scott A., Scott, Elaine P.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
FormatETD, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0983 seconds