yes / Size constraints and mutual coupling on the
performance of a two-element PIFA assembly are investigated
for a design frequency of 2.4 GHz. A benchmark antenna
assembly, employing a normal metallic ground plane is
compared with an EBG modified ground plane. The height of the
antenna elements over the EBG is optimised, and an isolation
factor of 9.12 dB is achieved for a gap of 2.5 mm. Prototype
structures have been constructed and measured for both cases.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/4787 |
| Date | 11 August 2010 |
| Creators | Abidin, Z.Z., Abd-Alhameed, Raed, McEwan, R.A., Child, Mark B. |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Conference paper, Accepted Manuscript |
| Rights | © 2010 IEEE. Reprinted, with permission: Abidin, Z. Z., Abd-Alhameed, R. A., McEwan, N. J. and Child, M. B. (2010). Analysis of the Effect of EBG on the Mutual Coupling for a two-PIFA Assembly. In: Loughborough Antennas & Propagation Conference (LAPC10), 8-9 November 2010, Loughborough, UK. IEEE. ISBN: 978-1-4244-7306-9/10. pp. 473-476. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Bradford¿s products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it. |
| Relation | http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5666200 |
Page generated in 0.0026 seconds