The spatial accuracy of points obtained from aerial laser scanning is most affected by the parameters of the GNSS receiver used, the IMU unit and the parameters of the flight itself. An important role is played by the accuracy of the so-called calibration, ie the determination of the transformation elements between the coordinate systems of the scanning unit itself, the IMU and the position of the phase center of the GNSS antenna. The diploma thesis deals with the calibration accuracy of the IMU / GNSS unit. It compares the displacements and rotations of a point cloud acquired by LiDAR (laser scanner RIEGL miniVUX-1UAV) in relation to the calibration elements given by the manufacturer. Evaluate the results using calculated standard deviations and positional differences in the raw point cloud, or by comparing point clouds obtained by another method. It also focuses on verifying geometric accuracy using checkpoints. The accuracy of the IMU / GNSS calibration is minimal after verifying the results and comparing the influence of the calibration elements given by the manufacturer. There was no significant improvement in the quality of the point cloud. At the same time, it was found that for better quality of the scanned data, it is necessary to perform cross-flights when UAV scanning. Key words UAV,...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:437845 |
| Date | January 2021 |
| Creators | Dvořák, Dennis |
| Contributors | Potůčková, Markéta, Dušánek, Petr |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds