In the present work, the breakage of wastewater particles in orifice flow is investigated through numerical simulations. Using maximum strain rate along particle paths as the breakage criterion, breakage is predicted using computational fluid dynamics. The numerical simulations confirm that nominal orifice strain rate cannot explain the higher particle breakage in single-orifice systems compared to that of multi-orifice systems, instead particle breakage was found to correlate well with the maximum strain rates in the system. On the issue of effect of initial particle location on breakage, numerical modeling shows that particles travelling along the centerline are suspected to break less than those travelling near the wall. However, experiments designed to study the breakage of particles injected at various radial locations proved inconclusive. Finally, results suggest that while single orifice systems are ideal for strong particles, multi-orifice systems may be more effective in breaking weak particles.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/33426 |
| Date | 22 November 2012 |
| Creators | Fernandes, Aaron Xavier |
| Contributors | Farnood, Ramin, Lawryshyn, Yuri Andrew |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds