Yes / Utilizing seawater and sea-sand for producing ultra-high performance concrete (UHPC) can substantially reduce raw materials costs and alleviate the current freshwater and river sand resources shortage in coastal and marine areas. However, the corrosion risk to reinforcing fibers inside UHPC caused by chlorides in seawater and sea-sand cannot be ignored. In this study, a new type of sustainable UHPC composed of seawater and desalinated sea-sand (UHPSSC) reinforced with stainless profile, super-fine stainless wire (SSW) was developed. Its mechanical properties and chloride content were studied. The research results show that SSWs do not rust after immersion in seawater. The flexural and compressive strengths of UHPSSC incorporating 1.5% SSWs are 13.8MPa and 138.6MPa, respectively, and the flexural toughness of UHPSSC is increased by 428.9%, reaching the basic mechanical requirements of UHPC. The high specific surface area of SSW and enrichment of silica fume on its surface enhance the interfacial bond between fiber and matrix, further promoting the full play of the SSWs’ reinforcing mechanisms as proved by the decrease of the Ca/Si ratio at the SSW surface. The C-S-H gels with a high Ca/Si ratio within the ITZ as well as Friedel’s salt are conducive to immobilize chlorides, blocking the migration of chlorides through the matrix and further mitigating the risk of long-term chloride corrosion of SSWs. Overall, utilizing seawater and desalinated sea-sand in combination with SSWs can produce UHPC with improved strength and toughness, making it a suitable choice for applications where high durability and long-term mechanical performance is required.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/19363 |
| Date | 09 March 2023 |
| Creators | Yu, F., Dong, S., Li, L., Ashour, Ashraf, Ding, S., Han, B., Ou, J. |
| Contributors | National Science Foundation of China (Grant Nos. 51908103, 51978127, and 52178188), the China Postdoctoral Science Foundation (No. 2022M710973) and the Fundamental Research Funds for the Central Universities (No. DUT21RC(3)039). |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Accepted manuscript |
| Rights | (c) 2023 ASCE. This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers. This material may be found at https://doi.org/10.1061/JMCEE7.MTENG-16072., Unspecified |
Page generated in 0.002 seconds