This master‘s thesis deals with the behaviour of strengthened reinforced concrete beams. The aim was to evaluate different types of strengthening in comparison not only with each other, but also with the reference beam. Three reinforced concrete beams were fabricated for the purpose of the thesis. The first served as a reference beam, the second was strengthened with carbon lamella glued to the lower edge of the reinforced concrete beam, and the last one was strengthened with unbonded post-tensioning system. Subsequently, they were all loaded by a four-point bending. An evaluation was then carried out which shows that the two strengthened reinforced concreate beams resist the load much better than the reference beam. In the conclusion, different utilization possibilities of both methods are listed, as well as the disadvantages that must be taken into account when designing.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:433485 |
| Date | January 2021 |
| Creators | Niedoba, Jakub |
| Contributors | Láník, Jaromír, Žítt, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds