Mathematical models were developed to understand cavity growth mechanisms, heat and mass transfer in combination with chemical reaction, and the factors which affect gas production from an underground coal gasifier. A model for coal gasification in a one-dimensional spatial domain was developed and validated through comparison with experimental measurements of the pyrolysis of large coal particles and cylindrical coal blocks. The effects of changes in operating conditions and coal properties on cavity growth were quantified. It was found that the operating conditions which have the greatest impact on cavity growth are: temperature, water influx, pressure and gas composition, while the coal properties which have the greatest impact are: the thermo-mechanical behaviour of the coal, the coal composition and the thickness of the ash layer. Comparison of the model results with estimates from field scale trials, indicate that the model predicts growth rates with magnitudes comparable to those observed. Model results with respect to the effect of ash content, water influx and pressure are in agreement with trends observed in field trials. A computational fluid dynamics model for simulating the combined transport phenomena and chemical reaction in an underground coal gasification cavity has been developed. Simulations of a two-dimensional axi-symmetric cavity partially filled with an inert ash bed have shown that when the oxidant is injected from the bottom of the cavity, the fluid flow in the void space is dominated by a single buoyancy force due to temperature gradients established by the combustion of volatiles produced from the gasification of carbon at the cavity walls. Simulations in which the oxidant was injected from the top of the cavity reveal a weak fluid circulation due to the absence of strong buoyancy forces, leading to poor gasification performance. A channel model of gas production from underground coal gasification was developed, which incorporates a zero-dimensional cavity growth model and mass transfer due to natural convection. A model sensitivity study is presented and model simulations elucidate the effects of operating conditions and coal properties on gas production.
Identifer | oai:union.ndltd.org:ADTP/187121 |
Date | January 2005 |
Creators | Perkins, Gregory Martin Parry, Materials Science & Engineering, Faculty of Science, UNSW |
Publisher | Awarded by:University of New South Wales. Materials Science and Engineering |
Source Sets | Australiasian Digital Theses Program |
Language | English |
Detected Language | English |
Rights | Copyright Gregory Martin Parry Perkins, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.027 seconds