Common mode performance is important for photovoltaic applications where the common mode voltage can become hazardous to people near the solar installation and can cause reliability concerns in inverters. The proposed dual-buck inverter uses hybrid unipolar modulation and a topology that is modified from the standard full-bridge dual-buck inverter to address the common mode voltage concerns. In the proposed design, the fast-switching side of the inverter is identical to a half-bridge dual-buck inverter, while the side that switches at line frequency uses a half-bridge of the standard H-bridge inverter topology. The motivation of this design is to realize the benefits of unipolar modulation and the dual-buck topology, while improving the poor common-mode voltage performance associated with unipolar modulation by utilizing hybrid switching. Unipolar switching has benefits which carry over to the hybrid switching scheme, such as reduced current ripple allowing use of smaller inductors.
Additionally, the dual-buck topology enables the effective use of faster switches due to the elimination of dead time and reverse recovery concerns by using devices such as wide-bandgap GaN HEMTS and SiC Schottky diodes. The proposed inverter topology also realizes the benefits of the dual-buck topology while using half of the number of diodes and inductors compared to a standard full-bridge dual-buck inverter. The use of this modified dual-buck topology and hybrid unipolar modulation results in an inverter which has favorable common mode voltage characteristics. These characteristics indicate that this inverter would be useful in applications sensitive to common mode voltage concerns, such as photovoltaic applications. The performance of this topology using hybrid unipolar modulation is investigated using simulations and by creating and testing a 300-watt prototype inverter. / Master of Science / The popularity of photovoltaic panels has been increasing rapidly in recent years due to popular desire to reduce reliance on nonrenewable energy sources and steady reductions in the cost of solar power installations. The DC power provided by photovoltaic panels requires an inverter to create AC power to interface with the grid. However, in some scenarios the common-mode voltage can induce leakage current in the system, which can be hazardous to nearby people. Leakage current is larger for systems with high parasitic capacitance and for inverters that create high frequency components in their common mode voltage. Photovoltaic panels tend to have high parasitic capacitance, causing leakage current concerns. Additionally, advancements in wide bandgap devices enable inverters to operate at increasingly higher switching frequencies, and this is typically advantageous because it allows size reduction of expensive and heavy components used in inverter output filters. However, this can exacerbate leakage current concerns by introducing high frequency components to the common mode voltage.
These developments create an incentive to investigate inverter designs that can mitigate leakage current concerns by creating favorable common mode voltage waveforms. Many existing solutions require circuit topologies with additional switches or use additional components like an isolation transformer or an additional common mode filter. These solutions add cost and complexity to inverter design. This thesis investigates a circuit topology based on a dual-buck inverter using hybrid unipolar switching, which will effectively utilize wide bandgap devices operating at high frequencies. The use of hybrid unipolar switching produces favorable common mode voltage characteristics that mitigates leakage current concerns while maintaining the quality of the output waveform, and the topology uses fewer diodes and inductors than a traditional dual-buck inverter. The design is evaluated through simulation and by creating and testing a 300-watt prototype to determine if it is suitable for photovoltaic applications and other applications where common mode voltage and leakage current are major concerns.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/116451 |
| Date | 11 October 2023 |
| Creators | Alcorn, Devon Montague |
| Contributors | Electrical Engineering, Lai, Jih S., Dimarino, Christina Marie, Southward, Steve C. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds