Ballistic shields are supported by a user’s arm, placing the upper extremity at close proximity to the back-face of the shield. Although ballistic shields must pass a protective standard that outlines projectile (bullet) penetration; there is no standard that stipulates the amount of acceptable deformation when ballistic shields stop or deflect projectiles. There are no injury criteria developed for the high-rate, short duration and focal loading that is typical of shield back-face deformation from these events.
In this research, an anthropomorphic test device (ATD) was modified to allow for additional instrumentation capable of measuring these loads. It was then used in a ballistic testing facility to quantify loading at the hand, wrist, forearm, and elbow. A lightweight projectile was created that matched the shape and stiffness of the deforming ballistic shield and impacts within 5% of the peak force measured in the ballistic testing facility were applied with it to post-mortem human subjects (PMHS) until failure. Eight 50th percentile male PMHS pairs were segmented at the mid-humerus and impacted to failure to determine the fracture threshold of the hand, wrist, forearm, and elbow, confirmed by x-ray imaging. The peak force required to generate fracture varied significantly among anatomical location, indicating boundary conditions influence failure threshold. Further, these injury criteria were substantially different than previously reported criteria for other loading events (e.g., automotive), highlighting the importance of developing injury criteria specific for the intended application.
An existing finite element human body model designed for automotive impacts was also assessed for its applicability to predict injury in these high-rate loading scenarios, and performed well for peak force, but not for the force-time curve shape. This is the first study of its kind to assess injury risk resulting from shield behind armour blunt trauma, and results from this work will inform a protective standard to assess ballistic shields. / Thesis / Doctor of Philosophy (PhD) / Ballistic shields used by defence personnel are designed to stop incoming bullets by deflecting or absorbing them. In the process, the back-face of the shield undergoes a rapid deformation that can potentially cause an upper extremity injury to users, an injury mechanism termed behind shield blunt trauma. This work aimed to quantify the injury risk that this mechanism poses at four locations along the upper extremity: the hand, wrist, forearm, and elbow. This was conducted by modifying and employing a crash test dummy upper extremity and measuring loads applied to the upper extremity in a ballistic testing range. Assessment of whether these loads caused injury was conducted using cadaveric specimens and testing them to failure. An existing finite element human body model was also assessed for its applicability to predict injury in these high-rate loading scenarios. Results from this work will inform a protective standard to assess ballistic shields.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/29286 |
| Date | January 2023 |
| Creators | de Lange, Julia |
| Contributors | Quenneville, Cheryl, Biomedical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds