Return to search

Using Variable Coding and Modulation to Increase Remote Sensing Downlink Capacity

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / Remote sensing satellites are typically low earth orbit, and often transmit the data gathered with the remote sensors to ground stations at locations on earth. These transmissions are band limited, and must operate within a 375 MHz bandwidth in the X-Band spectrum. This can present a limitation to the amount of data that can be transmitted during the short duration of a pass (typically less than 15 minutes). It is then highly desirable to increase the bandwidth efficiency of a system for data transmission in a remote sensing downlink. This paper describes a method of achieving higher efficiency by pre-programming the satellite to adjust the modulation and coding based in at least part on the slant range to the receiving ground station. The system uses variable coding and modulation to adjust to the slant range to the ground station to achieve a throughput increase of more than 50% of the data transferred during a pass using the currently accepted technology.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/605949
Date10 1900
CreatorsSinyard, David
ContributorsViaSat, Inc.
PublisherInternational Foundation for Telemetering
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Proceedings
RightsCopyright © held by the author; distribution rights International Foundation for Telemetering
Relationhttp://www.telemetry.org/

Page generated in 0.0125 seconds