VLE data is essential for the design and optimisation of industrial separation processes. Carboxylic acids are of significant interest because of their importance in both industrial and biological processes. Carboxylic acids are used as raw materials for a wide range of products, which include soaps , detergents, nylon , biodegradable plastics, medical drugs and food additives, They are also used both as solvents and as additives and co solvents under a wide range of conditions. Carboxylic acids exhibit strong self and cross -association through hydrogen bonds in both liquid and vapour phases. A thorough understanding of how these molecules interact both with themselves and with other solvents becomes necessary if existing processes may be optimised and new processes developed. Vapour-liquid equilibrium (VLE) data were measured for carboxylic acid systems ranging from C3 to C6• New vapour-liquid equilibrium data were measured for the following binary carboxylic acid systems: • Propionic acid + Hexanoic acid at 20 kPa, 403.15 K, 408.15 K and 413.15 K. • Isobutyric acid + Hexanoic acids at 20 kPa, 413.15 K and 423.15 K. • Valerie acid + Hexanoic acid at 15 kPa, 423 .15 K and 433.15 K. • Hexanoic acid + Heptanoic acid at 10 kPa and 443.15 K. A highly refined dynamic VLE Still by Raal (Raal and Muhlbauer [1998]) was used to undertake the VLE measurements. The still was operated either isothermally or isobarically using a computer control scheme. The isobaric and isothermal control was measured to be ±0.03 kPa and ±0.02 K respectively. The experimental procedure was verified with the highly volatile cyclohexane (l) + ethanol (2) system. The cyclohexane (l) + ethanol (2) measured VLE data was found to be in good agreement with that of Joseph (2001) and passed both the direct test and point test for thermodynamic consistency. A high degree of confidence was then placed on the equipment set-up and experimental procedure, as well as the new carboxylic acids VLE data . The VLE data for all the systems measured were modelled. Two data reduction methods were used: I. The combined ( r- ¢ ) method u. The direct method (¢ - ¢ ) method. In the combined method, the vapour phase non-idea lity was corrected using the Pitzer-Curl (1957) correlation and the Hayden and O' Connell (1975) chemical theory approach. Three liquid phase activity coefficient models were used namely the Wilson, NRTL, and UNIQUAC equations. The Peng-Robinson equation of state (Peng and Robinson [1976]) in combination with the Twu and Coon mixin g rule was used in the direct method. Thermodynamic consistency tests were done on all the systems measured. The point test (Van Ness et a!. [1973]) and the direct test Van Ness ([ 1995]) were used for consistency tests . The direct test could not be carried out on the carboxylic acids data because of the model's inability to adequately characterise the experimental activity coefficients. Generally the models fitted the data well but failed to accurately predict the "S" shape of the carboxylic acids phase diagrams. Considerable work still exists for further investigation into carboxylic acids. Currently, many experimentalists are working in this area . Penget a!. (2004) present ed their progress on developing an equation of state incorporating chemical theory to specifically handle carboxylic acids at the ICCT conference in Beijing, 2004. Raal and Clifford (University of Kwa-Zulu Natal, Thermodynamics Research Unit) are currently developing activity coefficient models incorporating chemical theory for a binary mixture of carboxylic acids. This work is part of the continuing research to under stand the phase behaviour of carboxylic acids. / Thesis (M.Sc.)-University of KwaZulu-Natal, Durban, 2005.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:ukzn/oai:http://researchspace.ukzn.ac.za:10413/2737 |
| Date | January 2005 |
| Creators | Hwengwere, Alex P. |
| Contributors | Ramjugernath, Deresh D., Raal, Johan David. |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0129 seconds