<p>The SAAB variable compression engine is a new engine concept that enables the fuel consumption to be radically cut by varying the compression ratio. A challenge with this new engine concept is that the compression ratio has a direct influence on the output torque, which means that a change in compression ratio also leads to a change in the torque. A torque change may be felt as a jerk in the movement of the car, and this is an undesirable effect since the driver has no control over the compression ratio. </p><p>The aim of this master's thesis work is to develop a torque control strategy for the SAAB variable compression engine. Where the main control objective is to make the output torque behave in a desirable way despite the influence of compression ratio changes. </p><p>The controller is developed using a design method called Internal Model Control, which is a straightforward way of both configuring a controller and determining its parameters. The controller has been implemented and evaluated in a real engine, and has proved to be able to reduce the effect of compression ratio disturbance.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-1821 |
| Date | January 2003 |
| Creators | Bergström, Andreas |
| Publisher | Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
| Relation | LiTH-ISY-Ex, ; 3421 |
Page generated in 0.0015 seconds