Return to search

Fatigue equivalent static load: Methodology for the design of vehicle structures

This study is concerned with the design of vehicle structures through the use of Fatigue Equivalent Static Loads (FESL). A large percentage of failures of mechanical structures can be attributed to fatigue. Furthermore, it is also generally accepted that defective structural design is mostly caused by insufficient knowledge of the input loading. The fatigue loads experienced by vehicle structures are especially difficult to quantify. In the current competitive markets, it is essential to use a pro-active, timely and cost effective process to solve fatigue related problems. The heart of the FESL methodology is the ability to condense a large amount of input load data into a single fatigue load. This is achieved by calculating the damage of the measurements and converting it to an equivalent stress, through the use of a calibration matrix obtained from a unit-load finite element analysis. A Fatigue Equivalent Static Load can now be determined, and the vehicle structure can be evaluated for durability. / Dissertation (M Eng (Mechanical Engineering))--University of Pretoria, 2003. / Mechanical and Aeronautical Engineering / unrestricted

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:up/oai:repository.up.ac.za:2263/25966
Date01 July 2005
CreatorsPrinsloo, Etienne Pieter Willem
ContributorsWannenburg, Johann, upetd@ais.up.ac.za
PublisherUniversity of Pretoria
Source SetsSouth African National ETD Portal
Detected LanguageEnglish
TypeDissertation
Rights© 2003, University of Pretoria. All rights reserved. The copyright in this work vests in the University of Pretoria. No part of this work may be reproduced or transmitted in any form or by any means, without the prior written permission of the University of Pretoria.

Page generated in 0.0018 seconds