Obtaining the modal parameters of a deflected and rolling tire represents a challenge due to the complex vibration characteristics that cause the tire's symmetry distortion and the natural frequencies' bifurcation phenomena. The modal parameters are usually extracted using a detailed finite element model. The main issue with full modal models (FEA, for example) is the inability to integrate the tire modal model with the vehicle models to tune the suspension system for optimal ride comfort. An in-plane rigid–elastic-coupled tire model was used to examine the 200 DOF finite difference method (FDM) modal analysis accuracy under non-ground contact and non-rotating conditions. The discrete in-plane rigid–elastic-coupled tire model was modified to include the contact patch restriction, centrifugal force, Doppler, and Coriolis effects, covering a range of 0-300 Hz. As a result, the influence of the contact patch and the rotating tire conditions on the natural frequencies and modes were obtained through modal analysis. The in-plane rigid–elastic-coupled modal model with varying conditions was created that connects any two DOFs around the tire's tread or sidewall as inputs or outputs. The vertical movement of the wheel was incorporated into the in-plane rigid–elastic-coupled tire modal model to extract the transfer function (TF) that connects road irregularities as an input to the wheel's vertical movement as an output. The TF was utilized in a quasi-static manner to obtain the tire's enveloping characteristics rolling over short wavelength obstacles as a direct function of vertical wheel displacement under varying contact patch length constraints. The tire modal model was implemented with the quarter car model to obtain the vehicle response rolling over short wavelength obstacles. Finally, a sensitivity analysis was performed to examine the influence of tire parameters and pretension forces on natural frequencies. / Doctor of Philosophy / The goal of vehicle manufacturers is to predict the vehicle's behavior under various driving conditions using mathematical models and simulation. Automotive companies rely heavily on computational simulation tools instead of real-time tests to shorten the product development cycle and reduce costs. However, the interaction between the tire and the road is one of the most critical aspects to consider when evaluating automobile stability and performance. The tires are responsible for generating the forces and moments that drive and maneuver the vehicle. Tires are complex products due to their intricate design, and their characteristics are affected by many factors such as vertical load, inflation pressure, speed, and a road with an uneven surface profile. Consequently, this project aims to describe the influence of various driving circumstances and load conditions on tire properties, as well as to develop a model that can represent the vertical tire and vehicle behavior while traveling over a cleat under different vehicle loads.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/111922 |
| Date | 19 September 2022 |
| Creators | Alobaid, Faisal |
| Contributors | Mechanical Engineering, Taheri, Saied, Kennedy, Ronald H., Ragab, Saad A., Barry, Oumar |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0026 seconds