Return to search

The Design and Implementation of a Magnetorheological Silicone Composite State-Switched Absorber

Tuned vibration absorbers (TVAs) are spring-mass-damper devices used to mini-mize energy in a vibrating body. TVAs decrease in efficiency when the vibrating body is
subjected to variable, broadband, or random excitation. A state-switched absorber (SSA)
can be used in these variable, broadband, or random excitation cases to more effectively
reduce excitation. An SSA is a mass-spring-damper where one or more of these elements can instantaneously and discretely change. An SSA was designed, built and tested to fit the
specifications for TVAs found on ATR 72 and 42 airplane fuselages. A magnetorheological
elastomer (MRE), an elastomer with imbedded iron particles, was selected as a variable
spring. Flux lines concentrated through all MREs in absorber configurations. MREs containing
35% iron by volume yielded the largest frequency shift. A 35% MRE based absorber had a frequency range of 45-183 Hz, which corresponds to a 360% frequency increase. Transient absorber behavior was observed by recording rise and drop times to step field intensity changes.The 35% MRE absorber yielded a 0.20 second rise time and a 0.03 second drop time. Future work will determine whether a modified input signal can generate an appropriate
transient response.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/7143
Date08 June 2005
CreatorsLerner, Anne-Marie Albanese
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Languageen_US
Detected LanguageEnglish
TypeThesis
Format2342008 bytes, application/pdf

Page generated in 0.0015 seconds