The Available Bit Rate (ABR) service class for the Asynchronous Transfer Mode (ATM) protocol was originally designed to manage data traffic. ABR flow control makes no guarantees concerning cell transfer delay or cell delay variation. A closed-loop feedback mechanism is used for traffic management. To use this class of service for video transport, the video source will accept feedback from the network and adapt its source rate based on this status information. The objective of this research is to assess the ability of the ATM ABR service class to deliver Moving Picture Experts Group version 1 (MPEG-1) video. Three approaches to source-level control are compared: (i) arbitrary loss or no control method, (ii) selective discard of MPEG B-pictures, and (iii) selective discard of MPEG B- and P-pictures. Performance is evaluated based on end-to-end delay, congested queue occupancy levels, network utilization, and jitter. A description of the investigation, assumptions, limitations, and results of the simulation study are included. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/31097 |
Date | 16 January 1998 |
Creators | Taylor, Elvin Lattis Jr. |
Contributors | Electrical and Computer Engineering, Midkiff, Scott F., Parry, Charles J., Davis, Nathaniel J. IV |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | etd.pdf |
Page generated in 0.0116 seconds