Inkjet-printed memory cards have been developed previously by re-searchers at Mid Sweden University but, these did possess some limita-tions, as each resistive memory cell required one physical contact and the resistances were designed to be electrically programmed.This work overcomes the above limitations by developing chemically programmed printed memory cards and a PC connected memory card reader. Printed memory cards are inexpensive and are developed by inkjet printing the nano-silver ink onto the photo paper substrate. A matrix readout method is used to increase the num-ber of memory cells and, by using a chemical solvent, the resistances were programmed to the desired resistance values and, for which, each resistance value represents data on the cards, called, write once read many (WORM) memories. The memory card reader was developed to access the data (resistance value) of the memory card and also to trans-mit the data to a LabVIEW graphical user interface for displaying the resistance values. By using multiple resistance steps, in which each step represents a different state, it is possible to create a number of possible selectable combinations which can be programmed at a later stage for developing applications.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-18577 |
Date | January 2013 |
Creators | Vadakke Kunninmel, Gokuldev |
Publisher | Mittuniversitetet, Avdelningen för elektronikkonstruktion |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0258 seconds