<p>Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed. New wastewater treatment processes are tested and evaluated and compared to conventional methods including both aerobic and anaerobic treatment processes.</p><p>One of the aerobic treatment processes includes enhanced biological phosphorus removal (EBPR or Bio-P) as the method for the removal of phosphorus. In biological phosphorus removal the wastewater is alternately being exposed to anaerobic and aerobic conditions, which favours a certain bacteria, which can accumulate more phosphorus than is required for their growth. For this phosphorus accumulation the bacteria need volatile fatty acids (VFA) to cover their energy demand, but normally there is a shortage in VFA in the incoming wastewater.</p><p>The main purpose of this master thesis work has been to create the best possible conditions in order to produce VFA by hydrolysis and fermentation of primary sludge. In this way the organic material in the incoming wastewater can be used in biological phosphorus removal.</p><p>The sludge temperature, total solids (TS) and retention time are regarded as important parameters for a successful biological phosphorus removal and a laboratory study was set up to investigate these conditions for the wastewater at the Hammarby Sjöstad experimental plant. These laboratory-scale hydrolysis experiments showed that high temperature and high TS favours VFA-production. The results have also shown that four to five days retention time is suitable at a process temperature higher than 23°C, but also that the retention time likely should be extended at lower temperatures.</p><p>In a full-scale process experiment, primary sludge was pumped from a primary clarifier to a hydrolysis tank and then back to the primary clarifier. The hydrolysis gave rise to increased VFA-production when TS was increased. A temperature difference between the primary sludge and the hydrolysis sludge of 3°C was observed. The reason behind the difference has not been determined, but is considered important, since the temperature affects the VFA-production. Further on, analyses with gas chromatograph (GC) have shown that acetate has been the most frequently occurring VFA, although significant levels of other VFA, such as propionate, has also been detected.</p><p>Phosphorus release tests in laboratory-scale, where phosphorus was released during an anaerobic phase and taken up during an aerobic phase, proved that biological phosphorus removal occurred at the full-scale experimental train.</p><p>The full-scale hydrolysis experiment has shown that the VFA contribution by the hydrolysis tank to the biological phosphorus removal was low. The main reason is that the sludge-flow through the hydrolysis tank has been insignificant compared to the incoming wastewater flow. The problem is most likely connected to the incoming wastewater characteristics, since the low share of suspended solids (SS) entailed that not enough organic material in the primary clarifier settled.</p> / I figur 57 på sidan 76 stämmer inte trendlinjernas ekvationer i den tryckta versionen. Dessa är nu korrigerade i den elektroniska versionen, så att rätt ekvationer finns i den aktuella figuren.
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-3997 |
| Date | January 2005 |
| Creators | Elfving, Erik |
| Publisher | Linköping University, Department of Water and Environmental Studies, Tema vatten i natur och samhälle |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.002 seconds