Return to search

Simulation of voltage source converter based shunt active filter in EMTP‐RV

The deterioration in power quality due to the increase in non linear loads has sparked a new interest
in the filtering techniques used in transmission and distribution systems. Unlike passive filters, active
filters are adaptable to rapidly changing source impedance and provide the necessary harmonic
compensation for varying non-linear loads.
This thesis models a Voltage Source Converter (VSC) based shunt active filter (SAF) to filter
harmonics due to large non linear loads. SAF compensates the harmonics by injecting a compensating
current which is equal in magnitude but opposite in phase to the disturbance in the system.
The power circuit of this SAF consists of a three-phase VSC and the switching signals for this
converter is generated by hysteresis based current modulation method. The controller uses the
sinusoidal current control strategy of the generalized instantaneous p-q control theory to calculate
the reference compensating current.
Proposed SAF is simulated using EMTP-RV simulation package under steady state and dynamic
conditions and its effectiveness in mitigating harmonics is tested. The stability and response
of the SAF is also tested satisfactorily under transient load and severe AC / DC fault conditions. / UOIT

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OOSHDU.10155/109
Date01 August 2010
CreatorsKhera, Dinesh
ContributorsSood, Vijay K.
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeThesis

Page generated in 0.0022 seconds