The dissertation deals with a design of an intelligent transmitter of a standard current signal with an Ethernet output port, an implementation of a web interface and Modbus TCP protocol for providing data protection. The introductory part describes standardized analogue technical signals with their possibilities, and characteristics of industrial Ethernet. The subsequent part provides an overview of alternatives to connect analogue signals to Ethernet while using various modules. The thesis continues with a suggestion of an analogue input side of the transmitter in connection with a digital module of Ethernet based on the Rabbit processor in connection with the RCM3200 module. The key part of the dissertation puts forward a proposal of the firmware transmitter and control web interface, shows ways of providing figures measured by the current loop via Ethernet interface for further processing. The final part is devoted to a description of current transmitter ultimate measurement.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218306 |
| Date | January 2010 |
| Creators | Štreit, Zdeněk |
| Contributors | Štohl, Radek, Bradáč, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds