Development of variable speed horizontal axis wind
turbines has resulted in a need for an analysis code with a
rotor speed degree-of-freedom. This study develops a five
degree-of-freedom time domain computer code that evaluates
blade and rotor, mean and cyclic loads with nonlinear
aerodynamics together with atmospheric turbulence as a
forcing function.
Verification of the model is made by comparison of
loads predictions between ESI-80 wind turbine data and
analytical solutions. Results show good agreement for mean
and cyclic loads and teeter angle excursions.
A single-blade point turbulence simulation model is
optimized using a three-blade point turbulence simulation
model. The optimum point is the 80% radius location,
although a multiplying factor is needed to make
conservative fatigue cycle predictions of blade bending.
ESI-80 start-up and shutdown scenarios are examined,
prediction trends matched ESI-80 data. Three generator
models are investigated. Results show that generator
torque cycles are reduced and yearly energy capture
increased by 24% when a variable speed generator is
implemented. / Graduation date: 1991
Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/37912 |
Date | 26 April 1991 |
Creators | Weber, Timothy L. |
Contributors | Wilson, Robert E. |
Source Sets | Oregon State University |
Language | en_US |
Detected Language | English |
Type | Thesis/Dissertation |
Page generated in 0.0015 seconds