Due to the rapid technological developments in the car industry and the high quality demands of customers, manufacturers and researchers focus on the reduction of surface roughness making use of various surface topography measurement systems. This master thesis focuses on development of a waviness measurement system (WMS) at Volvo Cars where light from different heights and angles illuminates the surface of an extended object in order to acquire images with different intensities due to shadowing effect and reflection. With this, surface irregularities and imperfections can be detected both in polished and unpolished surfaces for improving the car panels in the manufacturing process. The initial WMS idea was to illuminate the surface at different heights from the four corners of a dark room using 20 flash lights and a camera positioned exactly on the top of the surface in the middle of the room. The first light goes on and the image is acquired. This procedure continues for all flash lights in 19s.The acquired images were evaluated by Matlab application. With the new WMS system flash lights are replaced by 32 RGB COB LED lights using the DMX512 protocol to communicate with them. The system runs in 9s which is half the time of the old WMS system. New LabView and Matlab codes were adjusted to the new parameters and devices. In the end, measurements were taken with different surfaces, exposure times and color lights. Details of the new devices and software are analyzed in this thesis.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hh-28314 |
Date | January 2015 |
Creators | Biba, Panagiota |
Publisher | Högskolan i Halmstad, Akademin för informationsteknologi |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds