Liquid waste discharged from industrial outfalls is categorized into two major classes based on their density. One type is the effluent that has a higher density than that of the ambient water body. In this case, the discharged effluent has a tendency to sink as a negatively buoyant jet. The second type is the effluent that has a lower density than that of the ambient water body and is hence defined as a (positively) buoyant jet that causes the effluent to rise. Negatively/Positively buoyant jets are found in various civil and environmental engineering projects: discharges of desalination plants, discharges of cooling water from nuclear power plants turbines, mixing chambers, etc. This thesis investigated the mixing and dispersion characteristics of such jets numerically. In this thesis, mixing behavior of these jets is studied using a finite volume model (OpenFOAM). Various turbulence models have been applied in the numerical model to assess the accuracy of turbulence models in predicting the effluent discharges in submerged outfalls. Four Linear Eddy Viscosity Models (LEVMs) are used in the positively buoyant wall jet model for discharging of heated waste including: standard k-ε, RNG k-ε, realizable k-ε and SST k-ω turbulence models. It was found that RNG k-ε, and realizable k-ε turbulence models performed better among the four models chosen. Then, in the next step, numerical simulations of 30˚ and 45˚ inclined dense turbulent jets in stationary ambient water have been conducted. These two angles are examined in this study due to lower terminal rise height for 30˚ and 45˚, which is very important for discharges of effluent in shallow waters compared to higher angles. Five Reynolds-Averaged Navier-Stokes (RANS) turbulence models are applied to evaluate the accuracy of CFD predictions. These models include two LEVMs: RNG k-ε, and realizable k-ε; one Nonlinear Eddy Viscosity Model (NLEVM): Nonlinear k-ε; and two Reynolds Stress Models (RSMs): LRR and Launder-Gibson. It has been observed that the LRR turbulence model as well as the realizable k-ε model predict the flow more accurately among the various turbulence models studied herein.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OOU.#10393/24230 |
| Date | 07 June 2013 |
| Creators | Kheirkhah Gildeh, Hossein |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thèse / Thesis |
Page generated in 0.0058 seconds