Microplastic (MP) pollution is ubiquitous in the aquatic environment. Though their properties
are known to vary considerably, these particles are typically 1–5,000 μm in size and irregular in shape. Research suggests that MPs pose a significant hazard to aquatic ecosystems, lead to negative economic consequences, and may cause adverse human health effects. The effluents of municipal wastewater treatment plants (WWTPs) comprise a significant source of MPs, containing < 1 MP/L to > 440 MPs/L. Pursuant to the large volumes of wastewater processed, estimated daily effluxes can exceed one billion MPs/day in some WWTPs. Membrane technologies, like those used in some tertiary wastewater treatment applications, appear well-positioned to mitigate releases of MPs. However, research directly characterizing the performance of membranes in these applications is lacking. The studies in this work address this knowledge gap. To this end, irregularly-shaped MPs were produced in a novel milling/sieving process. Ultrafiltration and microfiltration membranes were challenged to these MPs suspended in secondary effluent wastewater to elucidate their fouling behaviour under realistic solution conditions. Subsequently, MPs milled/sieved from a fluorescently-labelled plastic feedstock were utilized in microfiltration experiments. Bulk MP concentrations in samples were easily measured using a plate reader to quantify MP rejection. Improving upon this technique, a new protocol involving a flow cytometer was developed, enabling the identification of individual fluorescent MPs in filtration samples, even when complex solutions chemistries were used. A culminating investigation was performed to bridge a gap in the literature between studies considering small-scale laboratory filtration phenomena and observations of large-scale WWTPs. Thus, the performance of a hollow fiber crossflow microfiltration module was evaluated in the filtration of wastewater containing MPs. Overall findings suggest that incidences of fouling by MPs can be managed via periodic cleaning processes, and the well-informed selection/operation of membrane technologies can contribute to high MP removal efficiencies (> 99%) in tertiary wastewater applications. / Thesis / Doctor of Philosophy (PhD) / The term "microplastics" (MPs) is used to describe microscopic plastic particles. Recent investigations have reported these MPs in lakes, rivers, and oceans across the globe. These reports are concerning as other studies demonstrate that MP pollution can be hazardous to aquatic life, yet the potential effects of MPs on human health remain largely unknown. Many MPs originate from municipal wastewater treatment plants (WWTPs) which discharge large numbers of these particles into the aquatic environment. Researchers often recommend the use of membranes as a barrier to prevent MPs from leaving in the final treated wastewater. This work seeks to assess that recommendation. Assessments of the effectiveness of membranes at withholding MP particles in wastewater are performed over various conditions. The propensity of MPs to interfere with the desired output of treated wastewater is also measured. Overall, findings indicate that carefully designed and operated membranes processes can be well-suited to this application.
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/28465 |
| Date | 13 June 2023 |
| Creators | LaRue, Ryan James |
| Contributors | Latulippe, David Robert, Chemical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds