Return to search

Enhancing the performance of wastewater microalgae through chemical and physical modifications in High Rate Algal Ponds

High rate algal ponds (HRAPs) are an advanced pond that provide efficient and cost-effective wastewater treatment, as well as the ability to recover nutrients in the form of microalgal biomass. Microalgal photosynthesis, nutrient uptake and subsequent growth, coupled with aerobic bacteria degradation of organic compounds, are fundamental to the process of wastewater treatment in HRAPs, yet are often limited in these ponds and, in particular, microalgal photosynthesis is well below the reported theoretical maximum. Understanding how the physico-chemical environment affects microalgal performance is therefore critical to improved wastewater treatment and nutrient recovery, yet has been the subject to few studies to date. This research focused on the enhancement of microalgal photo-physiology, growth and nutrient removal efficiency (NRE) through modification to the physical and chemical environment in wastewater HRAPs. In this study, I first examined the seasonal dynamics of microalgal performance in full-scale wastewater HRAPs. While both retention-time corrected chlorophyll biomass and photosynthetic potential increased from winter to summer, the summer-time performance was considered to be constrained, as indicated by the decreased light absorption, light conversion efficiency and NRE. The physico-chemical environment in the full-scale HRAPs were characterised by high day-time pH, high light attenuation and long, straight channels with low turbulence. This led to questions regarding 1) effects of nutrient supply, in particular carbon and 2) the role of the HRAP light climate on microalgal performance. I addressed these questions using a series of experiments that involved either changing the nutrient concentration and its supply or by modifying the light environment, through changes in pond operational parameters including CO2 addition, influent dilution, pond depth, hydraulic retention time (HRT), mixing speed and frequency. The overall results from these experiments showed that carbon was the primary and light the secondary limiting factors of microalgal performance. These limitations negatively affected light absorption, photosynthesis, productivity and NRE. While each operational parameter tested impacted on microalgal performance, to some degree, CO2 addition had the greatest influence on light absorption, photosynthetic efficiency and productivity, while continuous mixing had the greatest effect on NRE. Adding CO2 increased light absorption by 110% and 128%, maximum rate of photosynthesis by 185% and 218% and microalgal biovolume by between 150 – 256% and 260 – 660% (species specific), when cultures were maintained at pH 8 and 6.5, respectively. Providing sufficient mixing to achieve continuous turbulence enhanced NRE by between 300 – 425% (species specific), increased biomass concentrations between 150% and 4000% (species specific) compared to intermittent and no mixing, respectively, and increased harvest-ability of colonial species. However, at present, both CO2 addition and mechanical mixing attract high capital and operational costs. Modification to these technologies would be required to meet the objectives of cost-effective wastewater treatment and biofuel production. A more immediate and cost-effective solution demonstrated in this study was the altering pond depth, influent concentration and HRT. Doubling pond depth from 200 to 400 mm increased both microalgal nutrient removal and photosynthetic efficiencies which led to areal productivity increasing by up to 200%. When increased pond depth was coupled with decreased HRT, light absorption and photosynthetic performance further increased due to decreased internal self-shading and improved pond light climate. For nutrients, high influent loads increased productivity, while moderate loads increased effluent water quality. Overall, this work demonstrated that optimising the chemical and physical environment of wastewater treatment HRAPs (CO2 addition to maintain pH at 6.5 – 7, 400 mm pond depth, continuous mixing with vertical speed of 200 mm s-1, moderate nutrient load (15- 30 g m-3) and moderate HRT (4 / 6 days summer / autumn) can enhance microalgal biomass productivity, nutrient recovery as well as improve effluent water quality, particularly during summer when growth can be constrained.

Identiferoai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/10255
Date January 2015
CreatorsSutherland, Donna Lee
PublisherUniversity of Canterbury. School of Biological Sciences
Source SetsUniversity of Canterbury
LanguageEnglish
Detected LanguageEnglish
TypeElectronic thesis or dissertation, Text
RightsCopyright Donna Lee Sutherland, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml
RelationNZCU

Page generated in 0.0019 seconds