Escherichia coli (E. coli) is a gram-negative bacteria found in the intestinal system of humans that can also contaminate food, drinking water, as well as lakes and rivers. While not all strains are pathogenic, some including O157:H7 can cause severe illness. Conventional methods of detecting E. coli contamination in water samples often have limitations for on-site testing applications, which can include their slow detection time or need for expensive laboratory equipment. While several fluorescent biosensors for the detection of E. coli have been developed in the Didar lab, there is increased interest in colourimetric biosensors whose signal can be interpreted with the naked eye. This thesis will describe the development and performance of a hydrogel biosensor, that is made of polyacrylamide chains crosslinked by an E. coli detecting Deoxyribozyme (DNAzyme) and its substrate. In the presence of E. coli, the DNAzyme cleaves its substrate and crosslinking breaks down, resulting in the visible dissolution of the hydrogel. Paired with the use of bacteriophage induced cell lysis to amplify the target protein, detection sensitivity to the order of 10^1 CFU/mL has been achieved using this platform with an incubation time of 18 hours. A convolutional neural network (CNN) trained on optical images of the platform was able to classify samples as contaminated or uncontaminated with a validation accuracy of over 93%. / Thesis / Master of Applied Science (MASc) / Microbial contamination of water sources including surface water, groundwater, and drinking water can pose risks to human health. One bacterial species that can sometimes contaminate these sources is Escherichia coli (E. coli). To determine if E. coli is present in a water sample, it often needs to be sent to a laboratory for testing, which can be time consuming and inconvenient. Therefore, researchers are working to develop new sensors that are able to detect E. coli from water samples, ideally being simple enough to use that testing could be done right away and without sending the sample to another location. In this research project, we have developed a new biosensor that can detect E. coli in water samples. To use the sensor, a water sample is added onto a small red gel in a tube, and this gel breaks apart if E. coli is present in the sample.
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/29725 |
Date | January 2024 |
Creators | Mann, Hannah |
Contributors | Filipe, Carlos, Didar, Tohid, Chemical Engineering |
Source Sets | McMaster University |
Language | English |
Detected Language | English |
Type | Thesis |
Page generated in 0.0018 seconds