The waste water from the industrial production of the herbicide monosodium methyl arsenate was treated using coagulation. The coagulation process as developed in this research proved to be suitable for arsenic removal in aqueous media using chromium (III), calcium (II), and combination of calcium (II) and chromium (III), and magnesium (II). The results obtained suggest that the coagulation process can be used for the treatment of the waste water from the monosodium methyl arsenate production. Response surface methodology was used to study the effects of the various parameters, namely pH, mole ratios (Cr:As, Ca:As, and Mg:As), concentration of flocculent and initial arsenic concentration. To optimize the process conditions for the maximum removal of arsenic. Central composite and factorial designs were used to study the effects of these variables and to predict the effect of each. ANOVA was used to identify those factors which had significant effects on model quality and performance. The initial arsenic concentration appeared to be the only significant factor. These models were statistically tested and verified by confirmation experiments.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10426 |
Date | January 2010 |
Creators | Majavu, Avela |
Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis, Masters, MTech |
Format | xi, 134 leaves, pdf |
Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0018 seconds