Debarking of Acacia mearnsii in South Africa has been conducted using mainly manual systems. Labour shortages and reliability of these systems has caused interest in alternative systems that might be able to debark A. mearnsii. The aim of the research is to compare three mechanised debarking technologies used to debark A. mearnsii. Research trials were conducted on the Demuth, Hyena and Hypro debarkers that would form part of semi-mechanised harvesting systems. The debarking technologies were analysed and compared in terms of productivity per productive machine hour (PMH), debarking quality, system costs and the quality of the bark that was produced. Furthermore, the effect that tree volume, strippability and form have on each of the debarking technologies was determined. The debarking technologies were affected by each of the factors researched. Decreasing tree form had a negative effect on the productivity of each of the technologies. An increase in strippability class (strengthening wood-bark bond strength) caused a decrease in the productivity of each of the machines. An increasing tree volume had a positive effect on the productivity for the three debarking technologies. After the debarking had taken place, samples of bark were analysed at a laboratory to determine if it was acceptable for the processing facilities. Each of the debarking technologies produced bark of varying dimensions, but they were all found to be acceptable. The system costs of the three debarking technologies were compared to a manual system cost at tree volumes of 0.1m³, 0.15m³ and 0.2m³. The Demuth debarker had the best system cost for a tree size of 0.1m³, while the manual system was best for tree volumes 0.15m³ and 0.2m³. The Demuth, Hyena and manual system costs were very similar for each of the tree volumes, with the Hypro being a little higher.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10740 |
| Date | January 2010 |
| Creators | Eggers, John Rolf |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MTech |
| Format | 175 pages, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0017 seconds