A major problem faced by the petroleum industry is the deposition of wax during the pumping of waxy crude oils. This precipitation occurs at “normal” temperature, typically 20-30°C in Libya. It could occur during the journey from well to terminal through hundreds of miles of pipelines. This kind of transportation is expensive in terms of pumping costs. The pumping has to be continuous; otherwise wax can build up in the pipeline, reducing the pumping or even stopping it. The property that defines this characteristic is the yield stress which depends on wax concentration and cooling rate. The build-up of paraffin and asphaltenes can lead to serious problems in formation, tanks, and pipelines. Blockages can be expensive and time-consuming to deal with; this is precisely the topic of this research.
For this research, model and real waxy crude oils are formulated and their rheology systematically measured under various cooling rates to determine the yield stress. A pipeline loop has been designed to measure the start-up pressure of stagnant oil which has been allowed to precipitate wax. The start-up pressure and the thickness of deposited wax are used in a simple mathematical model to calculate the yield stress. This research thus provides two independent means of predicting the yield stress.
This research studied three different waxy crude oils. An MCR-301 Anton Paar rheometer was used to measure the rheology of the oils, and a pipeline rig was used to obtain the start-up pressure to calculate the yield stress of each type of oil after different stoppage times. Also, the thickness of the precipitated wax is measured to calculate the yield stress precisely.
The data show that the layer thickness has significant effect on the yield stress and start-up pressures and corresponding yield flow stresses have been found to underpin the crystallisation process of the wax and slow cooling rate produce stronger structures requiring higher stresses to fracture and induce flow. Also, longer shutdown times make these structures even stronger and therefore require even larger stresses for flow to commence.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/17481 |
| Date | January 2011 |
| Creators | Abdelrahim, A.M.A. |
| Contributors | Benkreira, Hadj, Patel, Rajnikant |
| Publisher | University of Bradford, University of Bradford, Faculty of Engineering and Informatics |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Thesis, doctoral, PhD |
| Rights | <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-nd/3.0/88x31.png" /></a><br />The University of Bradford theses are licenced under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/">Creative Commons Licence</a>. |
Page generated in 0.0025 seconds