Diploma thesis deals with the design of the automatically controlled ramp for the boarding of physically disabled people in city buses. The initial research section deals with the regulations and directives that must be respected in the design, the issue of wheelchair mobility and the analysis of design considered elements. In the second part the thesis goes to the chosen design solution. The design input parameters are the height of the ramp cassette, the slope of the ramp when boarding and the width of the boarding platform. The platform is extended by a pair of pneumatic cylinders along with a scissor mechanism guided in a linear ball guide. The boarding platform is made of an aluminium honeycomb panel which strength is verified by analytical calculation. At the front edge, the boarding platform is equipped with a pressure-sensitive edge The ramp cassette is made up of a welded frame of steel profiles and subjected to stress strain analysis. The thesis is accompanied by complete drawing documentation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318712 |
Date | January 2017 |
Creators | Pospíšil, Luděk |
Contributors | Maňas, Pavel, Dvořáček, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds