The effect of fabric structure and yarn-to-yarn liquid migration on the overall liquid transport behavior of fabrics is investigated in this research. Sorption of liquid from an unlimited reservoir as well as sorption of a limited quantity of liquid by fabrics representing different structural parameters is studied in detail. Sorption of a limited quantity of liquid is studied by performing drop spreading experiments on fabrics. The spreading and wicking of micron sized drops which are deposited on textile fabrics during ink jet printing is also studied. How the fabric structure related variables influence the spreading of ink drops and how exactly spreading influences printing quality is investigated in this research. Results showed that the wicking in fabrics is determined by the wicking rates of the yarns, thread spacing and more importantly by the rate at which liquid migrates from longitudinal to transverse threads and again from transverse threads back to longitudinal threads. Drop spreading rates were also determined by fabric structure. In general, compact and thinner fabrics showed highest drop spreading rates. Drop spreading rates are primarily affected by the manner and the rate at which liquid migrates from yarn to yarn. Analysis of the results of ink jet printing of pigment ink on textile fabrics showed that excessive drop spreading and higher line widths were observed where continuous and narrow capillaries prevail on the surface of yarns. Yarn surface characteristics are more important than fabric construction parameters.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/28244 |
| Date | 03 February 2009 |
| Creators | Mhetre, Shamal Kamalakar |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Dissertation |
Page generated in 0.0017 seconds