Recently, the advent of the integrated circuits (ICs), the monolithic microwave integrated circuits (MMICs) and the multiprocessing computer technology have provided numerous opportunities to make the radar technology compact and affordable. The ultra-wideband (UWB) technology gives many advantages over the traditional narrowband radar systems due to its high spatial resolution, low susceptibility to interference, superior penetration depths, and increased peak power. However, the ability to digitize and reconstruct the full UWB signal spectrum comes at a considerable cost and size. Ultimately, high-speed sampling rates above 10 giga-samples per second (GSPS) are beyond the abilities of conventional analog-to-digital converters (ADCs). The UWB technology is inaccessible to the end-user for various advanced applications in microwave imaging and detection. The purpose of this work is to provide a low-cost, dual-channel UWB pulsed-radar system that is readily available with a 1:10 system bandwidth. The advancements in low-cost alternatives for compact and portable designs empower many promising UWB applications. Here, the desired bandwidth is from 500 MHz to 5 GHz, which utilizes a fast pulse repetition frequency (PRF) in short-range applications. The preliminary results from the novel Equivalent-Time Sampling Receiver are promising with an equivalent-time sampling rate up to 20 GSPS. Nevertheless, the system design is versatile for bandwidth tuning in order to meet the needs of different applications. This versatility is enabled by: i) selection of the effective sampling rate through the field-programmable gate array (FPGA) programming environment, ii) choice of the receivers' front-end track and hold (T & H) amplifier bandwidth, iii) a collection of different PRFs from the low kilohertz up to 20 MHz, iv) tuning of the pulse generator bandwidth, and v) simultaneous multi-channel capabilities enabling antenna beam-forming, polarization diversity and spatial diversity. The result is a fully functional prototype that costs a fraction of traditional bench-top solutions. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/24838 |
| Date | January 2019 |
| Creators | Pitcher, Aaron D. |
| Contributors | Nikolova, Natalia K., Electrical and Computer Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds