As a part of the revitalization of the supersonic wind tunnel maintained by the Aerospace Engineering Department of Mississippi State University, a new data acquisition and control system became incumbent. Previous data acquisition and control systems used in the operation of the supersonic wind tunnel made use of now outdated hardware and functioned with two central processing units; one processor was used for recording system response, while the other monitored and controlled the tunnel. A new system is required to provide adequate rapid real-time control, along with rapid acquisition of raw tunnel feedback or response data and tunnel pressure data all implemented on one computer processor. The data acquisition and control program that was developed provides synchronized data storage and control output commands, while providing the operator with all essential information and checklists required for running the tunnel. The program is a general user interface developed from previously implemented data acquisition and control systems to perform all predetermined tasks while minimizing operator front panel inputs. When the supersonic wind tunnel repair is completed, the compiled data acquisition and control program will be implemented in the operation of the tunnel. This paper details the development of the supersonic wind tunnel data acquisition and control system employed in the revitalization project. Without the information on the details of the data acquisition and control program, any future editing of the control system source codes will be a laborious task.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-2434 |
| Date | 10 December 2005 |
| Creators | Okoro, Ndubuisi Emmanuel |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0827 seconds