The work deals with the use of software-defined radio as a probe for monitoring the operation of wireless communication according to the IEEE 802.11a/g standard. In the theoretical introduction, the concept of software-defined radio as a hardware device with software programmable circuits enabling the transmission or reception of signals in theoretically any frequency band is introduced. The introduction also contains adescription of selected devices and the IEEE 802.11 protocol with its most used additionsand modulations. In the first part of the practical part of the work, wireless communication is capturedusing a wireless network card in monitoring mode. The intercepted communication was decrypted and this decrypted traffic was compared with the data captured by the probe within the network. These results then served as acomparative basis for software-defined radio capturing. The focus of this work is to verify the capabilities of software-defined radio and its use for sniffing wireless communicationin the frequency band 2.4 GHz and 5 GHz. The attempt to use a software-defined radio here results from the scalability and adaptability that a wireless card cannot offer due to fixed hardware parameters. LimeSDR mini, LimeSDR and bladeRF 2.0 devices were used for capture. First, the configuration of the operating system, the installation of drivers and programs for control and work with selected devices are described. After verifying the functionality of the software-defined radio, a model of a signal decoder with the parameters of the IEEE 802.11g standard captured from the radio spectrum was put into operation. Finally, the data streams captured by the software-defined radio and the wireless network card were compared side by side. The results showed that the software-defined radio in the used configuration captures only a part of the total volume of transmitted frames.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:413071 |
| Date | January 2020 |
| Creators | Štrajt, Martin |
| Contributors | Štůsek, Martin, Pokorný, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds