Return to search

Extraction of Preservative Components from Treated Wood Waste

The preservative concentration difference in treated wood was investigated to understand the component distribution; a study of different chemical extractions of treated wood waste was carried out and certain reagents were realized to be feasible to the preservative component removal. During fixation, the preservative components redistributed between earlywood and latewood and concentration gradients at depths also developed. Different solvent extractions of CCA treated wood were tested and ion exchange, chelation and metal dissolving were all mechanisms for component extraction. The transition of Cr(III) to Cr(VI) by oxidizing reagents (NaClO and H2O2) can make possible the direct reuse of extracted chemicals as a preservative. Different reaction factors in the oxidant extractions were compared and higher pHs significantly improved the oxidizing capability of the reagents and CCA component removal. Fresh and aged CCA treated wood generally responsed similarly to the oxidant extractions. However, arsenic in aged wood was more difficult to be removed by NaClO, while, H2O2 was more efficient to extract CCA components from aged wood than fresh wood. Monoethanolamine (Mea) efficiently extracted copper (above 90%) from ACQ treated wood and the formation of stable neutral Cu(Mea)2 in sufficient Mea solution is the main mechanism for Mea extraction. Little wood structure degradation occurred during the process. Mea (10%~15%) extraction was fast and the effect of temperature was insignificant. Cu diffusion in the longitudinal direction was the most significant compared to other wood directions. To further promote Mea extraction, repeated extraction (batch-based and column-based) was performed and proved to be more efficient, feasible and economical than one-time extraction. Column-based continuous Mea extraction showed both high Cu removal (up to 99%) and Cu accumulation in the extract. After the preservative treated wood waste is decontaminated significantly, the extract solution can be reused by directly mixing with the preservative treating solution, which is the most straightforward procedure for the recycling of chemicals removed from the preservative treated wood.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/32859
Date31 August 2012
CreatorsZhou, Gao
ContributorsCooper, Paul
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Languageen_ca
Detected LanguageEnglish
TypeThesis

Page generated in 0.0022 seconds