The research investigated the interactions between paperboard and the gypsum core during the manufacturing process of gypsum wallboard. The goal of this research was to understand the paper properties that can affect the quality of the adhesive bond under simulated test conditions. The categories of paper properties tested include strength properties, surface properties, and paper additives. This research showed that the current test methods in use did not provide enough sensitive and reproducibility data to gain crucial insight into the paper/core adhesive interaction. A new evaluation method must be secured. However, with the results obtained, it was believed that the three types of failure could be described. First, the adhesive bond may fail resulting in a clean peel during bond quality testing. Second, the paper bond network may fail resulting in complete paper coverage of the gypsum core. Third, a mixed failure of adhesive and paper bond resulted in incomplete and varied paper coverage of the gypsum core.
Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-06302003-135902 |
Date | 01 July 2003 |
Creators | Tomasiewicz, Ryan |
Contributors | Dr. John A. Heitmann Jr., Dr. Joel J. Pawlak, Dr. Martin A. Hubbe |
Publisher | NCSU |
Source Sets | North Carolina State University |
Language | English |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://www.lib.ncsu.edu/theses/available/etd-06302003-135902/ |
Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0017 seconds