Microelectromechanical systems (MEMS) are miniaturized devices with high functionality. In recent years, MEMS products have become increasingly dominant in every aspect of the commercial market place. As the MEMS technology is in its infant stage and has several unique features compared to macro-scale products, it is faced with several challenges. One of them is that design and fabrication knowledge is very intrigue and thus very difficult to be accessible. An effective computer support to the MEMS product development is thus very important. This thesis study undertakes a thorough investigation into the MEMS product development process and its computer support. Specifically, the study examines the state-of-the-art in computer aided design systems in light of the support of product functionality. It is shown that MEMS product development involves high degree of uncertainty, which calls for an unconventional computer support. At this point, this study proposes an approach to construct a knowledge base in a fairly flexible and real-time manner. This approach is based on the extended function-behavior-structure framework and the template technique proposed in this thesis. The other finding is that the MEMS product development resembles the one-of-a-kind product (OKP) development. Therefore software tools for the OKP product development process can be applied to the MEMS product development process. These tools are examined, and further extensions upon them are proposed. Throughout the thesis, a microdispensing system is used as an example for illustration of concepts described in this thesis.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-04282004-105426 |
| Date | 28 April 2004 |
| Creators | Sinha, Niraj |
| Contributors | Schneider, Kevin, Oguocha, Ikechukwuka N., Burton, Richard T., Zhang, W. J. (Chris) |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-04282004-105426/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0018 seconds