Return to search

An x-ray dose comparator

This thesis describes the design and construction of an instrument for comparison of x-ray doses at two different points in an x-ray field. Essentially, it consists of two ionization chambers each fed into a very stable, linear, d.c. amplifier. The outputs of the d.c. amplifiers are coupled in such a way that a fraction of the output of one amplifier is balanced against the total output of the other in a ratio circuit. The scale of the ratio circuit may be set to read directly the dose at any point as a percentage of the dose at an arbitrarily chosen reference point. This percentage is independent of fluctuations of the x-ray intensity with time.
The instrument is battery-operated, light in weight and therefore easily portable. The principal use of the instrument is for the comparison of x-ray doses at different points in a tissue-equivalent medium — information required for dose estimates in radiotherapy. The accuracy of the instrument is better than one half percent of the maximum dose in the x-ray field. The instrument can be modified for automatic plotting of "isodose curves". / Science, Faculty of / Physics and Astronomy, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/40355
Date January 1956
CreatorsMibus, Sidney Albert
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0018 seconds